Products

Mavcoat® EC

  • Releases polyurethane from RTV silicone tooling. It bonds to and protects expensive silicone molds from tearing and extends silicone tooling 8 to 10 times the usual working life of the mold. Parts demold easily and cleanly so they can be painted or printed with little or no cleaning.

Mavcoat® T-100

  • Solvent-based and uses non-silicone polymers that allow finished parts to be painted, printed, plated, or post decorated in any way. T-100 provides release of cast elastomers from all types of tooling.

Mavcoat® 902M

  • This is the water-based version of Mavcoat T-100.

Mavcoat® HVP-I

  • HVP-I is engineered for high volume production environments that don’t need a strong release but still require a fast evaporating mold release with excellent surface wetting properties. Works well on polyurethanes that have Shore A hardness.

Mavcoat® EF-ND

  • This is the water-based version of Mavcoat® HVP-I.

Mavcoat® NB

  • Is our “workhorse” and one of our best-selling odorless solvent-based products. It is designed for hand casting or high volume automated production lines. It can be wiped on or spray applied with an airbrush. Good for releasing all Shore A and some Shore D polyurethanes.

Mavcoat® GHS

  • Is the strongest release coating in the Mavcoat® product line designed for processes that require a release coating to withstand the most aggressive elastomer chemistry. It does not contain solvents, is non-flammable, odorless, and produces multiple releases. GHS is equivalent to and replaces Wacker Release Agent E155.

Mavcoat® DHSR

  • Is a solvent-based chemistry that is near odorless and releases all rigid, closed-cell, polyurethane foam systems. DHSR adheres to any mold surface such as steel, aluminum, epoxy, fiberglass, or urethane.

Mavcoat® CFR-5

  • Is the water-based version of Mavcoat® DHSR.

Mavcoat® CDN

  • Is a completely silicone-free, water-based emulsion that is used in applications where silcone contamination is not allowed such as in aerospace parts and medical devices. CDN releases foams and elastomers and works best on heated metal molds where water can rapidly evaporated.

Mavcoat® S-81

  • Concentrated slurry-paste for sealing mold porosity. Does not contain any silicone. S-81 should be used to seal all types of molds such as epoxy, aluminum, and steel used to make high-resiliency and viscoelastic foam parts. S-81 is then followed by a mold release coating such as, Mavcoat® HR-W27 or HR-W32. S-81 can also be used to make master silicone molds.

Mavcoat® BR

  • A water based emulsion used to release rubber mats and all other parts made from recycled crumb rubber using urethane binder systems.

Mavcoat® HR-W27

  • A water-based chemistry that releases all flexible polyurethane foam systems from molds made of steel, aluminum, epoxy, fiberglass, or urethane. HR-W27 is ideal for high resiliency seating foam or visco-elastic foam used in pillow or bedding applications.

Mavcoat® HR-W32

  • A water-based chemistry that releases all flexible polyurethane foam systems from molds made of steel, aluminum, epoxy, fiberglass, or urethane. HR-W32 is ideal for high resiliency seating foam or visco-elastic foam used in pillow or bedding applications.

Mavcoat® T-100

  • Is solvent-based and uses non-silicone polymers that allow finished parts to be painted or post decorated. T-100 provides release of integral skin foams from all tooling such as metalized epoxy, aluminum, or fiberglass.

Mavcoat® HVP-E

  • An odorless, solvent-based chemistry that releases all self-skinning urethane foam systems from molds made of steel, aluminum, epoxy, fiberglass, or urethane. The developed skin is uniform, demolds easily and with excellent cosmetics.

Mavcoat® A2

  • Is the water-based version of Mavcoat® HVP-E.

Mavcoat® XC-ES

  • Does not contain any solvents and provides the greatest release strength for all flexible polyurethane foam systems. XC-ES will yield several parts from a single application.

Maverix Mold Cleaner – G

  • This gelled product clings to vertical surfaces, stays in place, and does not run down the tooling surface. It is a non-flammable cleaner that dissolves, encapsulates, and lifts all thermoset resins, epoxies, phenolics, urethanes, and thermoplastics from metal molds. The gel strips residue build-up from the tooling surface without attacking the metal.

Maverix Mold Cleaner – L

  • This is the liquid version, which is also non-flammable and dissolves, encapsulates, and lifts all thermoset resins, epoxies, phenolics, urethanes, and thermoplastics from metal molds. The liquid form allows Cleaner-L to be used in dip tanks and parts cleaning operations.

Maverix Cleaner 505

  • Is a strong water-based cleaner that strips wax-based release coatings from composite or metal molds.  This is a good cleaner for removing the yellowish-brown build-up from composite tooling that occurs with repeated use. Cleaner 505 also cleans light films of styrene buildup.

Maverix Cleaner 8700

  • This industrial cleaner is a free rinsing, low pH, non-toxic, concentrated all-purpose synthetic liquid detergent.  It lifts the soil load by getting under it and surrounding grime and dirt.  It then breaks up these contaminants into smaller particles, which are emulsified so they can be carried away, leaving a clean surface after rinsing. 

Maverix Cleaner 303

  • This is a strong solvent-based cleaner that removes wax-based release coatings from composite or metal molds.  Simply wipe 303 onto the mold surface and allow a short contact time for the chemistry to break down the residues and wipe clean.  303 will not harm mold surfaces – even those with class-A finishes.

Maverix Cleaner 202

  • Strips polymer-based, semi-permanent release coatings from composite or metal molds.

Please request a sample to determine if our technology works in your process.